2col Banner - News And Resources

Remington Model 700 & Model 40-X

If you own a Remington Model 700 or Model 40-X rifle:
Only those Model 700 or 40-X rifles made before March 1982 were manufactured with a bolt-lock mechanism. Model 700 or 40-X rifles made after March 1982 do not have a bolt-lock mechanism and may be loaded and unloaded with the safety in the “S” or “On Safe” position. Consequently, post-1982 Model 700 or 40-X rifles are not subject to this bolt-lock Safety Modification Program.

To determine whether your Model 700 or 40-X rifle has a bolt-lock mechanism, either:

  • Call Remington toll-free at 1-800-243-9700 and a service representative will help you determine if your firearm has a bolt-lock mechanism, or
  • If your Model 700 or 40-X rifle has a bolt-lock mechanism, it is eligible for this bolt-lock Safety Modification Program. If you participate, your firearm will be cleaned and inspected for proper functioning by a qualified gunsmith. Once the condition of your firearm has been assessed, you will be notified of one of the following:
  • Your firearm’s trigger assembly is otherwise in good operating condition, and the gunsmith will proceed to physically remove the bolt-lock feature so that your rifle can be loaded and unloaded while the safety remains in the “S” or “On Safe” position; or
  • Your rifle’s trigger assembly is found to be in an unsatisfactory or potentially unsafe operating condition because of any number of factors, including wear, alteration or maintenance. The entire trigger assembly will be replaced with a new factory trigger assembly, which does not incorporate a bolt-lock mechanism.


In either case, the total cost to you is $20 plus shipping and handling. You will also receive a safety redemption certificate to complete and submit in order to receive a free blaze orange hat (one hat per certificate).

How to participate in the Safety Modification Program

Complete the General Repair Form and Send or deliver your firearm and the completed repair form to:

Remington Arms Company, Inc.
Ilion Firearms Plant
Attention: BL Safety Program
14 Hoefler Avenue
Ilion, NY 13357

Remington will bill or arrange for payment once your firearm is received and evaluated.
 
 
CAUTION: It is your responsibility to comply with all laws and regulations regarding transportation or shipping of your firearm. Absolutely no ammunition should be packaged with the firearm whether loaded in the firearm itself or included in the shipping container. The firearm should be transported only in a completely unloaded condition.